Sandblasting processing range: Hardware rust removal, aluminum sandblasting, glass sandblasting (fog surface effect), plastic sandblasting (deburring edge), acrylic sandblasting (fog surface effect), PC, PS surface treatment, resin surface treatment, casting workpiece sandblasting, zinc alloy sandblasting (rough surface), stainless steel material sandblasting, stone material sandblasting, hardware paint removal, hardware scar removal, shot blasting, and other accessories surface treatment.


Acrylic sandblasting: If the customer requires very fog, generally spray glass sand, if the requirement is higher, you can choose white corundum. If the requirement is not very fog has a certain transparency, you must use glass beads, sometimes glass beads add a little glass sand, so that the effect of the spray is a little transparent.


Stainless steel sandblasting: It is generally necessary to understand what kind of panel stainless steel is, there are polished alloy steel balls, wire drawing surface, and the fog surface of the original plate, which needs roughness, and has no requirements for surface smoothness, brown corundum and white corundum can be selected, there are special requirements, which need smooth, glass beads and glass sand can be selected.


Die casting: generally is to remove burr low alloy steel, generally can use shot blasting machine low alloy steel, the use of cast steel balls, the use of steel ball sandblasting object surface scratches less, scratches shallow and small, for the removal of surface dirt more thick selection of steel sand, generally can consider the use of steel ball and steel sand mixed. If you want to make the color of the sandblasted aluminum parts more white, some high alloy steel should consider the cost of use
High stainless steel shot, steel wire cut shot, if you want to save costs, consider the cast steel ball and continuous steel shot according to the ratio of 8:2 mixed use, sandblasting shot each work will clean the steel ball once, more sandblasting shot several times can also achieve a relatively white effect.


Iron parts: Iron parts sandblasting is generally to remove the oxide layer and rust, to remove the edge of the thorn, some sandblasting will be electroplated low alloy steel, some will be painted after sandblasting, generally spray brown corundum and white corundum (according to the color demand and economic cost consideration).


For the work of steel structure, steel, steel plate rust blasting can be completely used to cast steel shot, steel sand and steel shot cutting ratio, which can reduce the cost on the basis of meeting the required SA2.5 level.